No products in the cart.
RUBBER SUPPORT INSERTS
- Used at the supporting points of insulated pipes to prevent crushing of insulation
- Excellent resistance to deterioration/distortion
- Tongue and groove design for small sizes
- Available with steel reinforcements for higher sizes
- Unique DOVETAIL lock for higher sizes
- Dimensionally accurate as each piece is molded
- Inherently superior to wood
QR 1.64 – QR 147.73RUBBER SUPPORT INSERTS
QR 1.64 – QR 147.73U STRAP WITH EPDM LINING
A Standard Pipe Strap with lining is recommended for supporting a piping system with fittings vertically or horizontally to walls or ceilings. It can be used as a restrainer when installed on top of structural wood beams for beam, for limiting pipe movements due to thrust loads during sprinkler system start-up.
QR 0.94 – QR 10.00U STRAP WITH EPDM LINING
QR 0.94 – QR 10.00U STRAP
A Standard Pipe Strap is recommended for supporting a piping system with fittings verticallyor horizontally to walls or ceilings. It can be used as a restrainer when installed on top of structural wood beams for beam, for limiting pipe movements due to thrust loads during sprinkler system start-up.
QR 0.85 – QR 9.00U STRAP
QR 0.85 – QR 9.00U BOLTS WITH LINING
U-BOLTS with lining are used to secure piping to structural members.
QR 1.85 – QR 4.71U BOLTS WITH LINING
QR 1.85 – QR 4.71CLEVIS HANGER UL LISTED
A CLEVIS HANGER provides for sizeable loads to be supported and for an elevation adjustment depending upon the pipe diameter. The lower nut adjusts the piping to the proper elevation and the upper nut, when locked into position, prevents loosening due to vibration.
QR 1.56 – QR 113.24CLEVIS HANGER UL LISTED
QR 1.56 – QR 113.24SPRINKLER HANGER
A SPRINKLER HANGER recommended to provide vertical support to non insulated piping systems. By adjusting the position of the sprinkler nut on the hanger rod at the top of the hanger, pipe elevation can be altered.
QR 0.95 – QR 5.46SPRINKLER HANGER
QR 0.95 – QR 5.46PIPE HANGER WITH EPDM LINING
PIPE HANGER WITH EPDM LINING is recommended for non-insulated stationary pipelines in a horizontal position. It can be used for supporting pipes along with the roof.
QR 0.57 – QR 3.13PIPE HANGER WITH EPDM LINING
QR 0.57 – QR 3.13