No products in the cart.
Hose Male Adaptor
The male pilot hose connector is used to connect two pilot
hoses together for systems where a second container of
a different size is used to protect a different enclosure.View Product Datasheet
QR 1.00Hose Male Adaptor
QR 1.00
Flexible Pilot Hose
The flexible pilot hose is used to connect pressure activated devices to the system .For e.g. the pilot cylinder to the slave
container to the pressure switch.View Product Datasheet
QR 1.00Flexible Pilot Hose
QR 1.00
Mechanical/Pneumatic Actuator
This Actuator is Used for mechanical or pneumatic operating system at the container position and is fitted to the top of the valve assembly or removable electrical actuator.
View product Datasheet
QR 1.00Mechanical/Pneumatic Actuator
QR 1.00
Supervisory Pressure Switch
A low pressure warning switch is fitted to every container and must be ordered separately. The device continuously monitors the container pressure and in the event of the pressure dropping below 20 bar (290 psi) the switch operates to enable the condition to be signaled to a control unit
View Product Datasheet
QR 1.00Supervisory Pressure Switch
QR 1.00
Manifold Inlet
Manifold inlets are available for the construction of system manifolds. Threaded Inlet for Manifolds
View Product Datasheet
QR 1.00Manifold Inlet
QR 1.00
Aspirating Smoke Detectors (ASD)
An ASD consists of one or two independent sampling tubes with sampling apertures, each with a highly sensitive smoke sensor.
View Product Datasheet
QR 1.00Aspirating Smoke Detectors (ASD)
QR 1.00
Universal Base for Fire Detectors
The USB 502 detector base series is used for connecting and mounting the SecuriStar detector family and is completely compatible with the USB 501 detector base series, although this series has a larger connection compartment inside the base.
View Product Datasheet
QR 1.00
Discharge Hose
The discharge hose is used with the 3” NPT single tank adaptor and 90° elbow to connect the container valve outlet to the distribution piping in single tank systems. The hose is constructed of corrugated stainless steel tubing with stainless braid cover.
View Product Datasheet
QR 1.00Discharge Hose
QR 1.00
Manifold Check Valve
Check valves are generally installed in pipelines to prevent backflow. A check valve is basically a one-way valve, in which the flow can run freely one way, but if the flow turns the valve will close to protect the piping, other valves, pumps .
View Product Datasheet
QR 1.00Manifold Check Valve
QR 1.00
Discharge Nozzle Brass
FM-200® is distributed within the protected area by the discharge nozzle which is sized to ensure the correct flow of agent for the risk. Nozzles are supplied as standard in Brass as BSPP or NPT with Stainless Steel as an option
View Product Datasheet
QR 1.00Discharge Nozzle Brass
QR 1.00
Wet Alarm Valves
The TYCO Model Alarm Check Valves that are intended for use in wet pipe (automatic sprinkler) fire protection systems.
View Product Datasheet
QR 1.00Wet Alarm Valves
QR 1.00
Deluge Valve, Diaphragm Style
The DV-5 Deluge Valve is a diaphragm style valve that depends upon water pressure in the Diaphragm Chamber to hold the Diaphragm closed against the water supply pressure .These valves are to be used only for
hydraulically calculated systems.View Product Datasheet
QR 1.00Deluge Valve, Diaphragm Style
QR 1.00
Loop powered Flashlight
Powered and driven by the loop. 2 flash frequencies (fast/slow), connectable to Securiline extended
View Product Datasheet
QR 1.00Loop powered Flashlight
QR 1.00
Automatic Voice Dialer
The single channel voice dialer that can be incorporated into hard wired or wireless security systems or used as a stand-alone unit.
View Product Datasheet
QR 1.00Automatic Voice Dialer
QR 1.00
Sprinkler Pipe Hangers
Adjustable swivel ring type steel band hangers suitable for suspension of all types of stationary pipes. Most commonly used for sprinkler system pipelines. Supplied complete with swivel nut.
View Product Datasheet
QR 1.00Sprinkler Pipe Hangers
QR 1.00
Pressure Switch
The Potter PS10 Series Pressure Actuated Switches are designed for the detection of a water flow condition in automatic fire sprinkler systems of particular designs such as wet pipe systems with alarm check valves, dry pipe, preaction, or deluge valves.
View Product Datasheet
QR 1.00Pressure Switch
QR 1.00
Water Flow Switch
The Potter VSR is a vane type waterflow switch with non-corrosive insert for use on wet sprinkler systems.
View Product Datasheet
QR 1.00Water Flow Switch
QR 1.00
Tamper Switch
The OSYSU is used to monitor the open position of an OS&Y (outside screw and yoke) type gate valve.
The Model PCVS is a weather proof and tamper resistant switch for monitoring the open position of fire sprinkler control valves of the wall and yard post indicator and butterfly types
QR 1.00Tamper Switch
QR 1.00
CO2 Fire Extinguisher
NAFFCO supplies high-performance fire extinguishers that will tackle fires quickly and effectively. CO₂ fire extinguishers are non-conductive and can be used to fight Class B and C fires.
View Product Datasheet
QR 1.00CO2 Fire Extinguisher
QR 1.00
Flame Detector
The Talentum Ultra-Violet, dual Infra-Red (UV/IR²) Flame Detector is designed to protect areas where open fires may be expected and detects most flames from hydrocarbon fires with 4.3 m emissions through to invisible fires such as hydrogen.
View Product Datasheet
QR 1.00Flame Detector
QR 1.00
Optical Beam Smoke Detector
The Fireray 5000 System is an auto-aligning, self-correcting infrared reflective beam smoke detector.
View Product Datasheet
QR 1.00Optical Beam Smoke Detector
QR 1.00