No products in the cart.
PIPE HANGER WITH EPDM LINING
PIPE HANGER WITH EPDM LINING is recommended for non-insulated stationary pipelines in a horizontal position. It can be used for supporting pipes along with the roof.
QR 0.57 – QR 3.13PIPE HANGER WITH EPDM LINING
QR 0.57 – QR 3.13U STRAP
A Standard Pipe Strap is recommended for supporting a piping system with fittings verticallyor horizontally to walls or ceilings. It can be used as a restrainer when installed on top of structural wood beams for beam, for limiting pipe movements due to thrust loads during sprinkler system start-up.
QR 0.85 – QR 9.00U STRAP
QR 0.85 – QR 9.00CLEVIS HANGER UL LISTED
A CLEVIS HANGER provides for sizeable loads to be supported and for an elevation adjustment depending upon the pipe diameter. The lower nut adjusts the piping to the proper elevation and the upper nut, when locked into position, prevents loosening due to vibration.
QR 1.56 – QR 113.24CLEVIS HANGER UL LISTED
QR 1.56 – QR 113.24
Clean Agent Fire Extinguisher
Ceasefire’s Clean Agent extinguishers contain HFC 236fa, the cleanest, most powerful extinguishing agent on the planet. They have zero ODP (Ozone Depletion Potential) and are the obvious choice of concerned corporates worldwide.
View Product Datasheet
QR 870.00Clean Agent Fire Extinguisher
QR 870.00SPRINKLER HANGER
A SPRINKLER HANGER recommended to provide vertical support to non insulated piping systems. By adjusting the position of the sprinkler nut on the hanger rod at the top of the hanger, pipe elevation can be altered.
QR 0.95 – QR 5.46SPRINKLER HANGER
QR 0.95 – QR 5.46
HIGH PRESSURE GATE VALVE
QCD Approved High Pressure Gate Valve.
QR 3,050.00HIGH PRESSURE GATE VALVE
QR 3,050.00
Hose Male Adaptor
The male pilot hose connector is used to connect two pilot
hoses together for systems where a second container of
a different size is used to protect a different enclosure.View Product Datasheet
QR 1.00Hose Male Adaptor
QR 1.00
Flexible Pilot Hose
The flexible pilot hose is used to connect pressure activated devices to the system .For e.g. the pilot cylinder to the slave
container to the pressure switch.View Product Datasheet
QR 1.00Flexible Pilot Hose
QR 1.00
Mechanical/Pneumatic Actuator
This Actuator is Used for mechanical or pneumatic operating system at the container position and is fitted to the top of the valve assembly or removable electrical actuator.
View product Datasheet
QR 1.00Mechanical/Pneumatic Actuator
QR 1.00
Supervisory Pressure Switch
A low pressure warning switch is fitted to every container and must be ordered separately. The device continuously monitors the container pressure and in the event of the pressure dropping below 20 bar (290 psi) the switch operates to enable the condition to be signaled to a control unit
View Product Datasheet
QR 1.00Supervisory Pressure Switch
QR 1.00
Manifold Inlet
Manifold inlets are available for the construction of system manifolds. Threaded Inlet for Manifolds
View Product Datasheet
QR 1.00Manifold Inlet
QR 1.00
Aspirating Smoke Detectors (ASD)
An ASD consists of one or two independent sampling tubes with sampling apertures, each with a highly sensitive smoke sensor.
View Product Datasheet
QR 1.00Aspirating Smoke Detectors (ASD)
QR 1.00
Universal Base for Fire Detectors
The USB 502 detector base series is used for connecting and mounting the SecuriStar detector family and is completely compatible with the USB 501 detector base series, although this series has a larger connection compartment inside the base.
View Product Datasheet
QR 1.00
Discharge Hose
The discharge hose is used with the 3” NPT single tank adaptor and 90° elbow to connect the container valve outlet to the distribution piping in single tank systems. The hose is constructed of corrugated stainless steel tubing with stainless braid cover.
View Product Datasheet
QR 1.00Discharge Hose
QR 1.00
Manifold Check Valve
Check valves are generally installed in pipelines to prevent backflow. A check valve is basically a one-way valve, in which the flow can run freely one way, but if the flow turns the valve will close to protect the piping, other valves, pumps .
View Product Datasheet
QR 1.00Manifold Check Valve
QR 1.00
Discharge Nozzle Brass
FM-200® is distributed within the protected area by the discharge nozzle which is sized to ensure the correct flow of agent for the risk. Nozzles are supplied as standard in Brass as BSPP or NPT with Stainless Steel as an option
View Product Datasheet
QR 1.00Discharge Nozzle Brass
QR 1.00
Butterfly Valve Grooved End
The TYCO Models BFV-300 and BFV300C Grooved End Butterfly Valves are indicating type valves designed for use in fire protection systems where a visual indication of open or closed valve condition is required
View Product Datasheet
QR 1.00Butterfly Valve Grooved End
QR 1.00
Water Motor Alarm
The TYCO Model WMA-1 Water Motor Alarm is a hydraulically-operated outdoor alarm designed for use with fire protection system water flow detection valves.
View Product Datasheet
QR 1.00Water Motor Alarm
QR 1.00
OS and Y Gate Valves
The Tyco Resilient Seated Gate Valves feature a lightweight ductile iron body that weighs less than conventional cast iron valves, which allows for easier handling on site and reduces shipping costs.
View Product Datasheet
QR 1.00OS and Y Gate Valves
QR 1.00
Retard Chamber for wet pipe sprinkler systems
The TYCO Model RC-1 Retard Chamber is required in installations that will be subject to pressure variations, as are generally associated with public water supplies, in order to help prevent false alarms.
View Product Datasheet RC-1
QR 1.00
Grooved Check Valve
The TYCO Model CV-1F Grooved End Swing Check Valves are compact and rugged swing-type units that allow water flow in one direction and prevent flow in the opposite direction.
View Product Datasheet
QR 1.00Grooved Check Valve
QR 1.00
Wet Alarm Valves
The TYCO Model Alarm Check Valves that are intended for use in wet pipe (automatic sprinkler) fire protection systems.
View Product Datasheet
QR 1.00Wet Alarm Valves
QR 1.00
Trim Vertical Closed Drain Concealed Sprinkler
The TYCO Series “Royal Flush II” Concealed Pendent Sprinklers Quick Response (3-mm bulb) and Standard Response (5-mm bulb), are decorative sprinklers featuring a flat cover plate designed to conceal the sprinkler.
The TYCO Model RC-1 Retard Chamber is required in installations that will be subject to pressure variations, as are generally associated with public water supplies, in order to help prevent false alarms.
QR 1.00
