No products in the cart.
Water Hammer Arrestor
Watts Drainage Products SS Series Stainless Steel Shock Arrestors are pre-charged and all stainless steel with stainless steel bellows and male IPS threaded connection.
View Product Datasheet
QR 1.00 – QR 117.00Water Hammer Arrestor
QR 1.00 – QR 117.00Backflow Preventers
Series LF709 Double Check Valve Assemblies are designed to prevent the reverse flow of polluted water from entering into the potable water system. This series can be applied, where approved by the local authority having jurisdiction, on non-health hazard installations. Series LF709 features a modular check design concept to facilitate easy maintenance. Check with local jurisdictional authority as to installation requirements. The LF709 features Lead Free* construction to comply with Lead Free* installation requirements.
View Product Datasheet
QR 1.00 – QR 2,548.00Backflow Preventers
QR 1.00 – QR 2,548.00Ball Valves – Flowcon
FIVC Ball Valve provides full port, hence implies less resistance in the flow. The valve is designed with Female-Female connections and is suitable for several applications including heating, glycol, and industry. The valve is constructed in Bronze and provides high tightness. The valve can be used for Water, Gas, and Oil respectively.
View Product Datasheet
QR 1.00 – QR 73.00Ball Valves – Flowcon
QR 1.00 – QR 73.00Rubber Expansion Joints – Union Nut Connection
Mounted on piping installations, the ZKT expansion joint absorbs expansions contractions, oscillations and vibrations, diminishes hammering, reduces noise and prevents electric currents from spreading.
View Product Datasheet
QR 1.00 – QR 29.66Rubber Expansion Joints – Union Nut Connection
QR 1.00 – QR 29.66Rubber Expansion Joints – Galvanized Steel Flanges
A rubber pipe expansion joint is a flexible connector of two pipes. It provides stress relief in a piping system due to thermal and mechanical vibration or movements.
View Product Datasheet
QR 1.00 – QR 828.16Rubber Expansion Joints – Galvanized Steel Flanges
QR 1.00 – QR 828.16Ball Valves
Series LFFBV 2-Piece, Full Port, Lead Free* Bronze Ball Valves comply with MSS-SP-110 and feature a blowout proof stem and virgin PTFE seats. The full port design ensures maximum flow capacity and minimal pressure drop. Lead Free* construction complies with Lead Free* installation requirements.
View Product Datasheet
QR 1.00 – QR 41.29Ball Valves
QR 1.00 – QR 41.29Double Check Valve Assemblies
Series LF007 Lead Free* Double Check Valve Assemblies prevent the reverse flow of liquids in a plumbing system due to backpressure or backsiphonage where there is a non-health hazard. Their compact design makes them easy to install in tight spaces
View Product Datasheet
QR 1.00 – QR 1,164.04Double Check Valve Assemblies
QR 1.00 – QR 1,164.04Cast Iron Swing Check Valves
CHECK VALVES, SWING TYPE, CI BODY, BRZ SEATS, FLANGED PN16
Watts Series F-511 Class 125 Cast Iron Check Valves comply with MSS-SP-71 and feature a bolted cover, bronze mounting and swing type disc. Series F-511 Class 125 Iron Check Valves are used in commercial applications.
View Product Datasheet
QR 1.00 – QR 315.00Cast Iron Swing Check Valves
QR 1.00 – QR 315.00DZR Brass Float Valve
DZR Brass Float Valve. Supplied with locknut. Machined fixed flange on valve body. No jam single lever action.
View Product Datasheet
QR 1.00DZR Brass Float Valve
QR 1.00Multistage, Horizontal High-Pressure Pump
The pumps of the BM-range are non-self priming, horizontal, multistage, end-suction centrifugal pumps. The pumps are of the close-coupled type.
View Product Datasheet
QR 1.00Vertical Multistage Inline Pump
Multi-speed vertical high-pressure centrifugal pump with stainless steel impellers and cast iron pedestal.
View Product DatasheetQR 1.00Vertical Multistage Inline Pump
QR 1.00Submersible Pump
Waste water and sewage pumps with in-built macerator system. Enable pumping of faecal matter into small pressure pipes (DN40)
View Product Datasheet
QR 1.00Submersible Pump
QR 1.00Horizontal End Suction Centrifugal Pump
The DESMI NSLH pumps are designed for horizontal mount and meets the special marine and industrial market requirements.
View Product Datasheet
QR 1.00Pressure Tank
Wates Pressure tanks used for drinking water level risers and distribution systems are required to maintain pressure in the system, optimize pump operation, guarantee a water reserve and protect against water impacts.
View Product Datasheet
QR 1.00Pressure Tank
QR 1.00Deluge Valve, Diaphragm Style
The DV-5 Deluge Valve is a diaphragm style valve that depends upon water pressure in the Diaphragm Chamber to hold the Diaphragm closed against the water supply pressure .These valves are to be used only for
hydraulically calculated systems.View Product Datasheet
QR 1.00Deluge Valve, Diaphragm Style
QR 1.00Trim Vertical Closed Drain Concealed Sprinkler
The TYCO Series “Royal Flush II” Concealed Pendent Sprinklers Quick Response (3-mm bulb) and Standard Response (5-mm bulb), are decorative sprinklers featuring a flat cover plate designed to conceal the sprinkler.
The TYCO Model RC-1 Retard Chamber is required in installations that will be subject to pressure variations, as are generally associated with public water supplies, in order to help prevent false alarms.
QR 1.00Bladder Expansion Tank
Intended for use in hydronic heating systems, these tanks accept the expanded volume of hot water keeping the system pressure below the relief valve setting, thus preventing dangerous pressure build-up.
View Product Datasheet
QR 1.00Bladder Expansion Tank
QR 1.00NRS Gate Valves – Ductile Iron
FIVC Gate Valve is designed to be installed in pipelines only for isolating purposes. Benefits of using gate valves include the feature of good closing along with the minimum pressure loss.
View Product Datasheet
QR 1.00NRS Gate Valves – Ductile Iron
QR 1.00Balancing Valves Variable Orifice Ductile Iron
FIVC Static Balancing Valve is designed with integrated pres sure probes to determine the flow rate through integrated fixed orifice.
View Product Datasheet
QR 1.00